Cisco 7935 Administration Guide - Page 33

Chapter 2 Installation of the Cisco IP Conference Station 7935 Preparing to Install Alternatively, you might use DHCP, but want to manually set the TFTP server. In this case, allow the station to start up, using DHCP, and then re-assign the TFTP server. Using DHCP If you are using DHCP in your network, but you are not using auto-registration, follow these steps to manually add the IP Conference Station to the Cisco CallManager database. The following procedure provides an overview of the steps you must perform in Cisco CallManager. Refer to the Cisco CallManager Administration documentation or online help in the Cisco CallManager Administration application for additional information. Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Start Cisco CallManager Administration. Add an IP Conference Station to Cisco CallManager by selecting Device > Add a New Device. The Add a New Device page displays. Choose Phone from the Device Type drop-down list box, and click Next. The Add a New Phone page displays. Choose the the Cisco 7935 phone type and click Next. The Phone Configuration page displays. Enter the required fields. Install the station by following the instructions in the "Installing the Cisco IP Conference Station 7935" section on page 2-6. 78-12727-03 Cisco IP Conference Station 7935 Administration Guide 2-5