Cisco 7935 Administration Guide - Page 34
Installing the CiscoIPConferenceStation7935
UPC - 746320488448
View all Cisco 7935 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Installing the Cisco IP Conference Station 7935 Chapter 2 Installation of the Cisco IP Conference Station 7935 Assigning Static IP Addresses If you do not use DHCP in your network, you must assign static IP addresses to each station, and you must configure each station locally. The following procedure provides an overview of the steps you must perform in Cisco CallManager. Refer to the Cisco CallManager Administration documentation or online help in the Cisco CallManager Administration application for additional information. Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Start Cisco CallManager Administration. Add a station to Cisco CallManager by selecting Device > Add a New Device. The Add a New Device page displays. Choose Phone from the Device Type drop-down list box, and click Next. The Add a New Phone page displays. Choose the the Cisco 7935 phone type and click Next. The Phone Configuration page displays. Enter the required fields. Install the IP Conference Station by following the instructions in the "Installing the Cisco IP Conference Station 7935" section on page 2-6. Configure the IP settings by following the instructions in the "Configuring IP Settings" section on page 3-7. Configure the TFTP server by following the instructions in the "Configuring TFTP Options" section on page 3-11. Installing the Cisco IP Conference Station 7935 Before installing an IP Conference Station, be sure to verify that your network meets the requirements that follow and that Cisco CallManager is properly configured. Most importantly, review the safety precautions in the "Safety Notices" section on page 2-9. Cisco IP Conference Station 7935 Administration Guide 2-6 78-12727-03