Cisco C3230-1W-49-K9 Hardware Guide - Page 22
Fiber Optic Connector IP–67 Integrity, Smart Serial Port External Seal for System Integrity
View all Cisco C3230-1W-49-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 1 Cisco 3200 Rugged Enclosures Note The connectors are sealed at the factory with captive dust covers (not shown) that seal the ports and protect the pins. The dust covers should be used to seal the ports when the ports are not covered by cable connectors. Fiber Optic Connector IP-67 Integrity When the fiber-optic port is not connected or otherwise in use, the protective cover should be used to seal the port. To seal the fiber-optic port when it is connected to a cable, use connectors that maintain IP-67 integrity. The part numbers for the connectors are Tyco 1828618-1 and Tyco 1828618-2. Caution When connecting fiber-optic cables, observe all standard procedures for safety, and maintain a clean connection. Power Connector IP-67 Integrity To seal the Tyco DC Power input power connector and maintain IP-67 integrity, use the following parts: • 796094-2-CPC housing • 66101-3-contact • 207489-1-boot • 207490-1-cable (grip size 11) Smart Serial Port External Seal for System Integrity When the Smart Serial port is not connected or otherwise in use, the protective cover should be used to seal the port. To seal the Smart Serial port when the port is connected to a cable, complete the steps in Appendix A, "Smart Serial Port External Seal." in the Cisco 3200 Series Router Hardware Reference. 1-10 Cisco 3200 Series Router Hardware Reference OL-5816-10