Cisco C3230-1W-49-K9 Hardware Guide - Page 75

Chapter 6 Wireless Mobile Interface Cards Table 6-9 Modulation 16 QAM 64 QAM Modulations and Data Rates (continued) 5 Mbps 10 Mbps 6 Mbps and 9 Mbps 12 Mbps and 18 Mbps 12 Mbps and 13.5 Mbps 24 Mbps and 27 Mbps 20 Mbps 24 Mbps and 27 Mbps 48 Mbps and 54 Mbps Receive Sensitivity Table 6-10 shows the receive sensitivity for the 4.9-GHz WMIC. Table 6-10 Receive Sensitivity for the 4.9-GHz WMIC 5 MHz 1.5 Mbps 2.25 Mbps 3 Mbps 4.5 Mbps 6 Mbps 9 Mbps 12 Mbps 13.5 Mbps -89 dBm -89 dBm -89 dBm -85 dBm -82 dBm -79 dBm -74 dBm -72 dBm 10 MHz 3 Mbps 4.5 Mbps 6 Mbps 9 Mbps 12 Mbps 18 Mbps 24 Mbps 27 Mbps -87 dBm -87 dBm -87 dBm -87 dBm -85 dBm -79 dBm -74 dBm -72 dBm 20 MHz 6 Mbps 9 Mbps 12 Mbps 18 Mbps 24 Mbps 36 Mbps 48 Mbps 54 Mbps -85 dBm -85 dBm -85 dBm -82 dBm -79 dBm -76 dBm -71 dBm -69 dBm 5.0-GHz (802.11h) Radio Features The 5-GHz radio supports only 20-MHz channelization. In addition, the 5-GHz radio supports Dynamic Frequency Selection (DFS) and Transmission Power Control (TPC) in the ETSI and FCC regulatory domains. For more information about DFS and TPC, see Radio Channels and Transmit Frequencies at http://www.cisco.com/en/US/products/hw/routers/ps272/products_installation_and_configuration_guid es_list.html. Note 802.11h is supported only in the ETSI regulatory domain. Note By default, the C3205 WMIC uses the right antenna to receive and transmit data. 5.0-GHz (802.11h) Channels The 5.0-GHz (802.11h) radio in the Cisco 3200 Series router (currently available as the Cisco 3205 WMIC) supports the following channels and frequencies in the ETSI regulatory domain: • 5.250 GHz to 5.350 GHz: 5260 MHz (52), 5280 MHz (56), 5300 MHz (60), 5320 MHz (64), • 5.470 GHz to 5.725 GHz: 5500 MHz (100), 5520 MHz (104), 5540 MHz (108), 5560 MHz (112), 5580 MHz (116), 5600 MHz (120), 5620 MHz (124), 5640 MHz (128), 5660 MHz (132), 5680 MHz (136), 5700 MHz (140). (Channels 52 through 140 are ETSI outdoor channels.) OL-5816-10 Cisco 3200 Series Router Hardware Reference 6-15