Cisco C3230-1W-49-K9 Hardware Guide - Page 87
Error Message, Explanation, Recommended Action
View all Cisco C3230-1W-49-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Appendix B SFP Module Replacement Error Message NOT_IDENTIFIED: Detected for transceiver module in %s, module disabled Explanation The transceiver module for the interface specified in the error message could not be identified and may not be compatible with the interface. The transceiver module specified in the error message contains a transceiver code which could not be correctly interpreted. As a result of the error, the module is disabled. Recommended Action Replace the module with a compatible transceiver. Error Message UNSUPPORTED-TRANCEIVER: Unsupported SFP transceiver found on board. Warranty/support may void Explanation The transceiver module for the interface specified in the error message is not a Cisco supported module. As a result of the error, the module is disabled. When Cisco determines that a fault or defect can be traced to the use of third-party transceivers installed by a customer or reseller, then, at Cisco's discretion, Cisco may withhold support under warranty or a Cisco support program. In the course of providing support for a Cisco networking product Cisco might require that the end user install Cisco transceivers if Cisco determines that removing third-party parts will assist Cisco in diagnosing the cause of a support issue. Recommended Action None. OL-5816-10 Cisco 3200 Series Router Hardware Reference B-5