Cisco C3230-1W-49-K9 Hardware Guide - Page 32
Thermal Plates
View all Cisco C3230-1W-49-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Chapter 1 Cisco 3200 Rugged Enclosures Table 1-5 shows the status of the LEDs when the WMIC is in operational mode. Table 1-5 WMIC Operational Mode Indication Green steady Red steady Green blink Amber blink Black (no light) Status LED At least one bridge is associated. Loading firmware. No bridges are associated. General warning. - Radio LED - Firmware failure. Transmitting or receiving packets on the radio port. Maximum retries or buffer full. Default. Thermal Plates Cisco 3200 Rugged Enclosures use thermal plates and Wedge Loks to transfer heat from the cards to the extrusion. Figure 1-11 shows a card with thermal plates. The conduction cooling removes the need for internal fans. Figure 1-11 Router Card with Thermal Plates 2 3 4 270446 1 1 Power connector 3 ISA bus 2 Wedge Lok 4 PCI bus 1-20 Cisco 3200 Series Router Hardware Reference OL-5816-10