Cisco CP-7942G Administration Guide - Page 126

Model Information Screen Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone Model Information Screen The Model Information screen includes the options described in Table 7-1. To display the Model Information screen, press the Settings button and then select Model Information. To exit the Model Information screen, press the Exit softkey. Table 7-1 Model Information Settings Option Model Number MAC Address Load File Boot Load ID Serial Number CTL File MIC LSC Call Control Protocol Description To Change Model number of the phone. Display only-cannot configure. MAC address of the phone. Display only-cannot configure. Identifier of the factory-installed load running Display only-cannot configure. on the phone. Identifier of the factory-installed load running Display only-cannot configure. on the phone. Serial number of the phone. Display only-cannot configure. Displays the MD5 hash of the certificate trust list (CTL) file that is installed in the phone. If no CTL file is installed on the phone, this field displays No. (If security is configured for the phone, the CTL file installs automatically when the phone reboots or resets.) For more information about this file, refer to Cisco Unified Communications Manager Security Guide. Indicates whether a manufacturing installed certificate (used for the security features) is installed on the phone or is not installed on the phone. For more information about how to manage the MIC for your phone, refer to the "Using the Certificate Authority Proxy Function" section in Cisco Unified Communications Manager Security Guide. Indicates whether a locally significant certificate (used for the security features) is installed on the phone or is not installed on the phone. For more information about how to manage the LSC for your phone, refer to the "Using the Certificate Authority Proxy Function" section in Cisco Unified Communications Manager Security Guide. Indicates the call processing protocol used by See the "Using Cisco Unified IP Phones with Different the phone. Protocols" section on page 2-11. Status Menu To display the Status menu, press the Settings button and then select Status. To exit the Status menu, press the Exit softkey. The Status menu includes theses options, which provide information about the phone and its operation: • Status Messages-Displays the Status Messages screen, which shows a log of important system messages. For more information, see the "Status Messages Screen" section on page 7-3. • Network Statistics-Displays the Network Statistics screen, which shows Ethernet traffic statistics. For more information, see the "Network Statistics Screen" section on page 7-8. • Firmware Versions-Displays the Firmware Versions screen, which shows information about the firmware running on the phone. For more information, see the "Firmware Versions Screen" section on page 7-10. Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0 7-2 OL-15483-01