Cisco E2100L User Guide - Page 11
Guest Access, Wireless Printer - default password
View all Cisco E2100L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Linksys E2100L 3. Enter a name that will be used to identify this device. Then click Finish. Chapter 2: Cisco Connect Guest Access The Guest access settings screen appears. Name Your Device Wireless Printer 1. Refer to your printer's documentation to learn how to connect it to a wireless printer. 2. Enter the Network name (SSID), Security Key, and Security Type settings on your wireless printer. To print this information, click Print these settings. Guest Access Settings Allow guest access By default, guest access is enabled. To disable guest access, select no. Guest network name By default, the setup software sets up the name of the guest network. Password By default, the setup software sets up the password for the guest network. To change the password, click Change. If you clicked Change, the Change guest password screen appears. Connecting a Wireless Printer 3. Wait until your printer connects. On the Connecting a wireless printer screen, click Next. 4. Enter a name that will be used to identify this printer. Then click Finish. Name Your Printer Change Guest Password •• Enter a new guest password Enter a password of 4-32 characters. •• Click Change to save your setting. Total guests allowed By default, 5 guests are allowed Internet access through the guest network. Select the appropriate number of guests allowed on your guest network; you can select up to 10 guests. Click Finish to save your settings. Advanced Wireless-N Router 8