Cisco WRT54G User Manual - Page 42

Wireless-G Broadband Router The Administration Tab - Factory Defaults Click the Yes button to reset all configuration settings to their default values, and then click the Save Settings button. Any settings you have saved will be lost when the default settings are restored. This feature is disabled by default. Figure 5-43: Administration Tab - Factory Defaults The Administration Tab - Firmware Upgrade Firmware can be upgraded by clicking the Upgrade button after browsing for the firmware, which you can download from the Linksys website. Do not upgrade your firmware unless you are experiencing problems with the Router. For more information about upgrading firmware, refer to "Appendix C: Upgrading Firmware". Figure 5-44: Administration Tab - Firmware Upgrade The Administration Tab - Config Management This screen is used to back up or restore the Router's configuration file. To back up the Router's configuration file, click the Backup button. Then follow the on-screen instructions. To restore the Router's configuration file, click the Browse button to locate the file, and follow the on-screen instructions. After you have selected the file, click the Restore button. Change these settings as described here and click the Save Settings button to apply your changes or Cancel Changes to cancel your changes Chapter 5: Configuring the Wireless-G Broadband Router The Administration Tab - Factory Defaults Figure 5-45: Administration Tab - Config Management 36