Clifford Arrow 5 Owners Guide - Page 12
transmitter sensor disable, intellistart and smartwindows sensor bypass - 1 remotes
View all Clifford Arrow 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
transmitter sensor disable To temporarily disable a sensor input, arm the system, press the and simultaneously. The lights will flash four times and all warn away trigger zones three and eight are bypassed. Press the buttons again; the lights flash four times and both warn away and full trigger zones three and eight are bypassed until the system is disarmed. This can be performed anytime the system is armed. 1. Arm the system. 2. Using the transmitter, bypass the sensor. 3. The lights will flash four times; all warn away zones are now bypassed. 4. Transmit the sensor bypass channel again. 5. The lights will flash four more times; the sensor warn away and full trigger zones are now bypassed. 6. The sensor zones will reset when disarmed. intellistart and smartwindows sensor bypass When the system sees a command to start the vehicle via the Intellistart, it bypasses zones three, seven, and eight, and will continue bypass these zones until the remote start shuts down. Zone four will bypass for 5 seconds from the time it remote starts and again for 5 seconds after remote start shut down. When the system sees a SmartWindows command for up or down operation, the unit will automatically bypass zones three and eight until the windows complete their operation. © 2004 directed electronics, inc. 9