Clifford Arrow 5 Owners Guide - Page 18
diagnostics
View all Clifford Arrow 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Press on the PlainView 2 Valet switch while playing the desired sound to add that sound; press while playing the desired sound to delete that sound. diagnostics The microprocessor at the heart of your security system is constantly monitoring all of the switches and sensors that are connected to it. It detects any faulty switches and sensors and prevents them from disabling the entire system. The microprocessor will also record and report any triggers that occurred during your absence. arming diagnostics If the system is armed while an input is active (door open, sensor triggering, etc.) the unit will chirp twice when arming and then four more times five seconds later. This is called Bypass Notification. The security system will ignore the input that was active when the system was armed, until the input goes away. Three seconds later the system will monitor that input normally. For example, if your vehicle has interior light exit delay, and you arm the system before the interior light goes out, you may hear Bypass Notification chirps. Once the light shuts off, however, the doors are monitored normally. © 2004 directed electronics, inc. 15