Clifford Arrow 5 Owners Guide - Page 28

Select Siren Sounds - 1 reset

Page 28 highlights

select siren sounds z The individual sounds the 515C siren produces during an full trigger alarm can be customized for owner recognition of an alarm trigger. For more information, please refer to the Select Siren Sounds section of this guide. fact II on/off z On: The alarm will bypass for 60 minutes if zones 3, 5, and 8 are triggered three times within a one hour period. z Off: The alarm will respond to zones 3, 5, and 8 inputs indefinitely without bypassing. remote valet on/off z On: The alarm can be put into valet mode with the remote control. z Off: The alarm can not be put into valet mode with the remote control. entry delay on/off z On: If the system has passively armed, it will not trigger for 15 seconds after a door is opened allowing the user to enter the vehicle and disarm the system via the PlainView 2 Valet switch. z Off: There is no entry delay when armed. The system will trigger instantly when a door is opened. reset to default settings z All system settings (except PIN and remote programming) in the User Programming grid will be reset to their default fac- tory setting as indicated in bold lettering. z Press on the transmitter; the siren will chirp twice as confirmation. © 2004 directed electronics, inc. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37

25
© 2004 directed electronics, inc.
select siren sounds
The individual sounds the 515C siren produces during an full
trigger alarm can be customized for owner recognition of an
alarm trigger. For more information, please refer to the
Select Siren Sounds
section of this guide.
fact II on/off
On: The alarm will bypass for 60 minutes if zones 3, 5, and
8 are triggered three times within a one hour period.
Off: The alarm will respond to zones 3, 5, and 8 inputs indef-
initely without bypassing.
remote valet on/off
On: The alarm can be put into valet mode with the remote
control.
Off: The alarm can not be put into valet mode with the
remote control.
entry delay on/off
On: If the system has passively armed, it will not trigger for
15 seconds after a door is opened allowing the user to enter
the vehicle and disarm the system via the PlainView 2 Valet
switch.
Off: There is no entry delay when armed. The system will
trigger instantly when a door is opened.
reset to default settings
All system settings (except PIN and remote programming) in
the User Programming grid will be reset to their default fac-
tory setting as indicated in bold lettering.
Press
on the transmitter; the siren will chirp twice as
confirmation.