Clifford Arrow 5 Owners Guide - Page 13
auxiliary channel bypass, panic mode with smart door locking, valet mode - 1 - alarm system
View all Clifford Arrow 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
auxiliary channel bypass Alarm sensor input zones three and eight will be bypassed while a pulsed or timed auxiliary Output is active. panic mode with smart door locking If you are threatened in or near your vehicle, you can attract attention by triggering the system with your transmitter! Just press for two seconds to enter Panic Mode. The siren will sound and the park- ing lights will flash for the programmed duration. If the ignition is on, the doors will lock; if the ignition is off, the doors will unlock. To stop Panic Mode at any time press on the transmitter again. note: If the ignition is on, the doors will lock; if off, the doors will unlock. valet mode You can prevent your security system from automatically arming by using Valet Mode. This is very useful when washing the vehicle or having it serviced. In Valet Mode, the security system will not arm, even with the transmitter, but all convenience functions (door locks, trunk release, etc.) will continue to work normally. To enter Valet Mode: 1. Turn the ignition on. 2. Enter PIN code (factory setting is 2). © 2003 directed electronics, inc.