Clifford Arrow 5 Owners Guide - Page 14

3. After the last digit continue to hold for three seconds. The LED status indicator will light steadily if you are entering Valet Mode and will turn off if you are exiting Valet Mode. To exit Valet Mode: 1. Turn the ignition on. 2. Within 10-seconds press once. note: The pin code can be entered after turning the ignition On and the press and hold the blank key on the PlainView 2 Valet switch for one second. transmitter valet mode The operations described in this section refer to transmitter buttons. Remember, the buttons used in all the instructions in this guide correspond to a Standard Configuration transmitter. This may not be how your transmitter is set up. To enter Valet Mode, press and simultaneously. The LED status indicator will light solid if you are entering Valet Mode, or will turn off if you are exiting Valet Mode. © 2004 directed electronics, inc. 11