Cobra 75 All Road 75 All Road Manual - Page 13

Maintenance/Adjustment & FAQ Maintenance/Adjustment Your Cobra CB transceiver is specifically designed for the environment encountered in mobile installations. The use of all solid state circuitry and its light weight result in high reliability. Should a failure occur, however, review the following, then if necessary, replace parts with identical parts. Substitution is not recommended. If you have questions, please call Cobra Customer Care at 800-543-1608 (hours are listed on the Cobra.com website). 1. Check connections to the source of power and make sure it is the 13.8 VDC required to operate your radio. 2. Check Bluetooth® connection and be sure handset and transceiver are paired. 3. Check the fuses in the DC power cord and in the 12V accessory power plug.The main power lead (red) has a 2 Amp fuse - type F2AL 125V - UL rated in its holder. Use only the above specified type and size fuse for maximum protection. Failure to do so will void the warranty. 4. Make certain the microphone is properly plugged in. 5. Make certain the antenna is properly assembled and connected. If you are unable to correct the problem, please contact Cobra customer service. 20 Troubleshooting TroubleshootIinntrog Problem: Operation Customer Assistance When streaming or taking a phone call from my headset, I hear static. Installation Customer Assistance Secondary Icons Why can't I hear anything coming out of my headset? Notice Caution I cannot disconnect my headset from the All Road. Warranty Recommended Action(s): - Turn the volume on the All Road OFF, or - Adjust the Squelch to the maximum level using the handset (press the SQ/ASQ button). - Pair your headset to the All Road. - Check the Audio Path (through All Road Menu). Warning - Disconnect through the Menu on the handset: Press ENT/MENU>>BLUETOOTH>>PAIR>>HEADSET>>DISCONNECT. I answer a phone call on my SmartPhone and hear no sound. I am not using the All Road or my wireless headset. - Turn off Bluetooth on your Smartphone (headset may still be connected if in range). I cannot Push-to-Talk with my multi-point headset when using the All Road. - A headset requires an external PTT function which can be resolved by using the All Road handset or All Road wireless Push-to-Talk Button to communicate over your headset with the All Road CB. The Handset continuously displays the Cobra Logo and not the normal CB radio. - Disconnect power from the BlackBox unit. - Connect the Handset directly to the BlackBox USB port. - Re-connect 12V power to the BlackBox and push the Handset power button to turn ON the All Road (if needed). - The Handset will automatically pair and connect to the BlackBox and should boot to the CB radio function. - Power down the All Road and remove the Handset from the BlackBox USB port then use the All Road per the original installation and use case. NOTE: A full list of Frequently Asked Questions can be found on the 75 All Road product page on cobra.com. 21