Cobra XRS 9670 XRS 9670 Manual - Page 14

Your Detector Settings SmartPower Your detector includes the SmartPower feature that, when activated, will put the unit into Standby mode (low power) for about 30 minutes after the car's engine has been turned Off. After 30 minutes in Standby mode, the unit will automatically turn Off. SmartPower Entering Standby Mode Pwr Save Before SmartPower enters Standby mode, you will hear one beep and Pwr Save will appear on the display. To return the unit to normal Power mode or exit Standby mode, start the car, press any button or turn the unit Off and then On again. The factory setting is SmartPower On. To Turn SmartPower Mode On or Off Using Program Mode (See Page 7 For Instructions on Using Program Mode) In Program mode, go to SmartPower. Tone Two beeps Visual Display SmartPower On One beep SmartPower Off ...Power On ...Power Off 22 English Your Detector Settings DigiView Data Display Brightness Your detector has a Bright display mode (for daytime driving) and three levels of Dim display modes (Dim for dusk driving, Dimmer for night driving and Dark where no visual alerts will be displayed) to control the display's brightness levels. The factory setting is Bright. The factory Dim mode default setting is Dimmer. Dark Indicator . Select/Dim Button To Change the Brightness to Dim Press and release the Tone Select/Dim button once. Two beeps Visual Display Dim, Dimmer or Dark Dim Display Dimmer Display Dark Display Dim Dimmer Dark NOTE When you change to Dim mode, the unit will enter whichever dim default mode is set at the time. To Change the Brightness to Bright Press and release the Tone Select/Dim button again. One beep Bright Display Bright Visual Display Bright Nothing Comes Close to a Cobra® 23