Cobra XRS 9670 XRS 9670 Manual - Page 6
Programming User Modes - how to use
View all Cobra XRS 9670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Your Detector EasySet Programming EasySet Programming • All user mode settings on your detector can be changed by using Program mode. When changing the settings, please keep in mind: g Buttons can have multiple functions. g All settings will be stored in memory when the power is turned Off and recalled when the power is turned back On. The procedure for using Program mode is shown on page 7. NOTE You cannot enter Program mode during an alert. The unit will not detect signals while in Program mode. During programming, if no buttons are pushed for ten seconds, the unit will automatically exit Program mode and save the last settings. Programming User Modes The tables on pages 8 through 9 show you how to program all user modes and the settings you can choose from. NOTE On the following pages, you will find more detailed explanations of each setting. See page 14 for instructions on setting the IntelliMute activation point. See page 17 for instructions on calibrating the compass. See page 22 for instructions on using SmartPower. 6 English Your Detector EasySet Programming To Use Program Mode Press and hold the Program/Mute button for two seconds. Tone Three beeps While the programming instructions are scrolling, press and release the Select/Dim button to cycle through the user modes. One beep with each button press With the user mode you One or two beeps, wish to change displayed, depending on your press and release selection the Set/City button to change the setting. To move to the next selection, press the Select/Dim button again. When you have finished programming any or all of the user modes, press and release the Program/Mute button to exit Program mode. Or simply wait ten seconds without pushing any buttons. One beep Set/City Button Press and release Select/Dim Button Press and release Program/Mute Button Press and hold/Press and release Visual Display Program will appear. PROGRAM Then brief programming instructions will scroll through the display three times. As each mode is displayed, the current setting for that mode will be shown. The setting you select will be shown. When you exit Program mode, the new setting will automatically be saved and EXIT PROGRAM and Settings Saved! will appear in the display. EXIT Settings PROGRAM Saved! Nothing Comes Close to a Cobra® 7