Compaq 2510p HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 61
WLAN modules are designed with a notch, to prevent incorrect installation.
View all Compaq 2510p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
2. Remove the two Phillips PM2.0×3.0 screws (3) that secure the WLAN module to the computer. (The edge of the module opposite the slot rises away from the computer.) 3. Remove the WLAN module (1) by pulling the module away from the slot at an angle. NOTE: WLAN modules are designed with a notch (2) to prevent incorrect installation. Reverse this procedure to install the WLAN module. Component replacement procedures 51
2.
Remove the two Phillips PM2.0×3.0 screws
(3)
that secure the WLAN module to the computer.
(The edge of the module opposite the slot rises away from the computer.)
3.
Remove the WLAN module
(1)
by pulling the module away from the slot at an angle.
NOTE:
WLAN modules are designed with a notch
(2)
to prevent incorrect installation.
Reverse this procedure to install the WLAN module.
Component replacement procedures
51