Compaq 2510p HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 83
Speaker assembly, Display assembly see
View all Compaq 2510p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Reverse the preceding procedure to install the system board. Speaker assembly Description Speaker assembly Spare part number 451747-001 Before removing the speaker assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the following components: a. Hard drive (see Hard drive on page 52) b. Optical drive (see Optical drive on page 56) c. Switch cover (see Switch cover on page 57) d. Keyboard (see Keyboard on page 59) e. Display assembly (see Display assembly on page 62) f. Top cover (see Top cover on page 67) g. System board (see System board on page 70) Remove the speaker assembly: 1. Remove the Torx T8M2.5×4.0 screw (1) that secures the speaker assembly to the base enclosure. Component replacement procedures 73