Compaq 2510p HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 73

Remove the two Torx T8M2.5×7.0 screws, Lift the display assembly straight up and remove

Get Compaq 2510p - Notebook PC PDF manuals and user guides View all Compaq 2510p manuals
Add to My Manuals
Save this manual to your list of manuals

Page 73 highlights

6. Remove the WLAN antenna cables (3) from the routing channel and clips built into the top cover. 7. Disconnect the microphone cable (4) from the microphone pass-through cable. 8. Disconnect the display lid switch module cable (1) from the system board. 9. Remove the two Torx T8M2.5×7.0 screws (2) that secure the display assembly to the computer. 10. Lift the display assembly straight up and remove it (3). 11. If it is necessary to replace the display lid switch module, remove the Phillips PM1.5×3.0 screw (1) that secures the module to the display assembly left hinge. 12. Rotate the module (2) ¼-turn counterclockwise. Component replacement procedures 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
6.
Remove the WLAN antenna cables
(3)
from the routing channel and clips built into the top cover.
7.
Disconnect the microphone cable
(4)
from the microphone pass-through cable.
8.
Disconnect the display lid switch module cable
(1)
from the system board.
9.
Remove the two Torx T8M2.5×7.0 screws
(2)
that secure the display assembly to the computer.
10.
Lift the display assembly straight up and remove it
(3)
.
11.
If it is necessary to replace the display lid switch module, remove the Phillips PM1.5×3.0 screw
(1)
that secures the module to the display assembly left hinge.
12.
Rotate the module
(2)
¼-turn counterclockwise.
Component replacement procedures
63