Compaq 2510p HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 68
Remove the switch cover., Reverse this procedure to install the switch cover. - remove keyboard
View all Compaq 2510p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
3. Release the switch cover by lifting and swinging the hinge cover sections up and forward until the switch cover rests upside down on the keyboard. 4. Release the zero insertion force (ZIF) connector (1) to which the LED board cable is attached, and disconnect the LED board cable (2) from the connector. 5. Remove the switch cover. Reverse this procedure to install the switch cover. 58 Chapter 4 Removal and replacement procedures
3.
Release the switch cover by lifting and swinging the hinge cover sections up and forward until the
switch cover rests upside down on the keyboard.
4.
Release the zero insertion force (ZIF) connector
(1)
to which the LED board cable is attached, and
disconnect the LED board cable
(2)
from the connector.
5.
Remove the switch cover.
Reverse this procedure to install the switch cover.
58
Chapter 4
Removal and replacement procedures