Compaq 2510p HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 71
force LIF connector, If it is necessary to replace the LED board cable, disconnect the cable
View all Compaq 2510p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
7. Release the ZIF connector (3) to which the pointing stick cable is attached, and disconnect the pointing stick cable (4) from the system board. 8. Remove the keyboard. 9. If it is necessary to replace the LED board cable, turn the keyboard upside down, with the bottom of the keyboard toward you. 10. If it is necessary to replace the LED board cable, disconnect the cable (1) from the low insertion force (LIF) connector (2) to which it is attached, and remove the LED board cable (3). The LED board cable is included in the Cable Kit, spare part number 451722-001. Reverse this procedure to install the keyboard. Component replacement procedures 61
7.
Release the ZIF connector
(3)
to which the pointing stick cable is attached, and disconnect the
pointing stick cable
(4)
from the system board.
8.
Remove the keyboard.
9.
If it is necessary to replace the LED board cable, turn the keyboard upside down, with the bottom
of the keyboard toward you.
10.
If it is necessary to replace the LED board cable, disconnect the cable
(1)
from the low insertion
force (LIF) connector
(2)
to which it is attached, and remove the LED board cable
(3)
. The LED
board cable is included in the Cable Kit, spare part number 451722-001.
Reverse this procedure to install the keyboard.
Component replacement procedures
61