Compaq 2510p HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 72

Display assembly - wireless switch

Get Compaq 2510p - Notebook PC PDF manuals and user guides View all Compaq 2510p manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

Display assembly Description 12.1-inch, WXGA display assembly with AntiGlare (includes wireless antenna transceivers and cables and microphone and cable) Spare part number 451741-001 Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 48) and the WWAN module (see WWAN module on page 54). 6. Remove the following components: a. Switch cover (see Switch cover on page 57) b. Keyboard (see Keyboard on page 59) Remove the display assembly: 1. Position the computer with the rear panel toward you and the display in an upright position. 2. Remove the two Torx T8M2.5×7.0 screws that secure the display assembly to the computer. 3. Position the computer with the front toward you. 4. Remove the WWAN antenna cables (1) from the routing channel and clips built into the top cover. 5. Disconnect the display panel cable (2) from the system board. 62 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
Display assembly
Description
Spare part number
12.1-inch, WXGA display assembly with AntiGlare (includes wireless antenna transceivers and
cables and microphone and cable)
451741-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
41
).
5.
Disconnect the wireless antenna cables from the WLAN module (see
WLAN module
on page
48
)
and the WWAN module (see
WWAN module
on page
54
).
6.
Remove the following components:
a.
Switch cover (see
Switch cover
on page
57
)
b.
Keyboard (see
Keyboard
on page
59
)
Remove the display assembly:
1.
Position the computer with the rear panel toward you and the display in an upright position.
2.
Remove the two Torx T8M2.5×7.0 screws that secure the display assembly to the computer.
3.
Position the computer with the front toward you.
4.
Remove the WWAN antenna cables
(1)
from the routing channel and clips built into the top cover.
5.
Disconnect the display panel cable
(2)
from the system board.
62
Chapter 4
Removal and replacement procedures