Compaq 400 320 321 420 421 620 and 621 Notebook PC and 420 and 620 Notebook PC - Page 105
to release the bezel from the display enclosure ., Remove the display assembly
View all Compaq 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Remove the display assembly: 1. If it is necessary to replace the display bezel, display enclosure, or display hinges, remove the two mylar screw covers (1) and the 2 Phillips PM2.5×4.0 screws (2) that secure the display bezel to the display assembly. The screw covers are available in the Rubber Kit, spare part number 598678-001. 2. Starting at the top of the display, flex the bezel (1) and work around the periphery of the bezel (2) and (3) to release the bezel from the display enclosure . 3. Lift the bezel (4) from the display enclosure. Component replacement procedures 97
Remove the display assembly:
1.
If it is necessary to replace the display bezel, display enclosure, or display hinges, remove the two
mylar screw covers
(1)
and the 2 Phillips PM2.5×4.0 screws
(2)
that secure the display bezel to
the display assembly. The screw covers are available in the Rubber Kit, spare part number
598678-001.
2.
Starting at the top of the display, flex the bezel
(1)
and work around the periphery of the bezel
(2)
and
(3)
to release the bezel from the display enclosure .
3.
Lift the bezel
(4)
from the display enclosure.
Component replacement procedures
97