Compaq 400 320 321 420 421 620 and 621 Notebook PC and 420 and 620 Notebook PC - Page 108
To remove the WLAN antennas, Route the antenna cables
View all Compaq 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
2. Remove the microphone cable from the raceway (2) in the display enclosure. To replace the display cable assembly: 1. Place the display panel face down on a protected soft surface and remove the clear protector (1) that covers the cable connector on the back of the panel. 2. Remove the display cable (2) from the back of the display panel. To remove the WLAN antennas: 1. Route the antenna cables (1) out of the routing channels in the inside of the display enclosure. 100 Chapter 4 Removal and replacement procedures
2.
Remove the microphone cable from the raceway
(2)
in the display enclosure.
To replace the display cable assembly:
1.
Place the display panel face down on a protected soft surface and remove the clear protector
(1)
that covers the cable connector on the back of the panel.
2.
Remove the display cable
(2)
from the back of the display panel.
To remove the WLAN antennas:
1.
Route the antenna cables
(1)
out of the routing channels in the inside of the display enclosure.
100
Chapter 4
Removal and replacement procedures