Compaq 400 320 321 420 421 620 and 621 Notebook PC and 420 and 620 Notebook PC - Page 65
Remove two Phillips PM2.0×3.0 screws
View all Compaq 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Before removing the service door follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 56). Remove the service door on a 39.6-cm (15.6-in) computer: 1. Remove four Phillips PM2.0×3.0 screws (1) that secure the service door to the computer. 2. Slide the service door (2) away from the computer. Remove the service door on a 35.6-cm (14-in) or 33.8-cm (13.3-in) computer: 1. Remove two Phillips PM2.0×3.0 screws (1) that secure the service door to the computer. Component replacement procedures 57