Compaq Presario 1100 Compaq Evo Notebook N1010v Series and Compaq Presario 110 - Page 84
To remove a RAM expansion module, Click Start, Turn Off Computer, Turn Off.
View all Compaq Presario 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
CAUTION Add-On Devices Installing Additional RAM To remove a RAM expansion module You may want to remove a RAM module so you can install a larger one. You'll need a small Phillips screwdriver for these steps. Your computer's chips are extremely sensitive to static electricity, and can be permanently damaged by it. Handle the RAM module only by its edges. Before installing the memory module, discharge your body's static electricity by touching the metal shielding around the connectors on the back of the computer. 1. Click Start, Turn Off Computer, Turn Off. 2. Important: unplug the AC adapter, if present, and remove the battery. 3. Turn the unit bottom-side up, loosen the screws holding the RAM cover, and remove the cover. 4. Release the two latches at the sides of the RAM board, so the free edge of the board pops up. 5. Pull the board out of the connector. 6. Replace the cover. 7. Insert the battery. 88 Reference Guide