Compaq W4000 Compaq Evo Workstation W4000 CMT Hardware Reference Guide - Page 24
Removing Bezel Blanks, Removing Bezel Blanks from the Subpanel
View all Compaq W4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Hardware Upgrades Removing Bezel Blanks 1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock. 2. Shut down the operating system properly, then turn off the computer and any external devices. Disconnect the power cord from the power outlet and disconnect any external devices. 3. Remove the computer access panel. Remove the front bezel. 4. Gently pull the subpanel, with the bezel blanks secured in it, away from the front bezel, then remove the desired bezel blank. Ä CAUTION: Hold the subpanel straight when you pull it away from the front bezel. Pulling the subpanel away at an angle could damage the pins that align it within the front bezel. Removing Bezel Blanks from the Subpanel ✎ When replacing the subpanel, ensure that the aligning pins and any remaining bezel blanks are in their proper orientation. 2-6 Hardware Reference Guide