Compaq nc6000 Hardware Guide - Page 100
Lift the edge of the memory module, module. The module tilts upward when released.
View all Compaq nc6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Hardware Upgrades If replacing the existing memory in the primary memory slot, you must remove any memory in the memory expansion slot first. If you are adding memory to the memory expansion slot, proceed to step 9. 8. To remove a memory module from the memory expansion slot: a. Pull the retention clips 1 away from each side of the module. The module tilts upward when released. b. Lift the edge of the memory module 2, and gently remove it from the slot. Ä To protect a memory module after it has been removed, place it in a static-safe container. Repeat step 8 to remove the memory module from the primary memory slot, if necessary. Hardware Guide 8-9
Hardware Upgrades
Hardware Guide
8–9
If replacing the existing memory in the primary memory slot,
you must remove any memory in the memory expansion
slot first.
If you are adding memory to the memory expansion slot,
proceed to step 9.
8. To remove a memory module from the memory
expansion slot:
a.
Pull the retention clips
1
away from each side of the
module. The module tilts upward when released.
b.
Lift the edge of the memory module
2
, and gently
remove it from the slot.
Ä
To protect a memory module after it has been removed,
place it in a static-safe container.
Repeat step 8 to remove the memory module from the
primary memory slot, if necessary.