Compaq nc6000 Hardware Guide - Page 76
Using the Audio Line-Out Jack, Using the Microphone Jack, Audio components
View all Compaq nc6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Audio and Video Audio components (Continued) Item Component Description 4 Volume buttons (2) Adjust the system volume. Press the volume up button to increase sound. Press the volume down button to decrease sound. 5 Speakers (2) Produce system sound. Using the Audio Line-Out Jack Å WARNING: To reduce the risk of personal injury, adjust the volume before putting on headphones or a headset. Ä CAUTION: To prevent possible damage to an external device, do not plug a single-sound channel (monaural) connector into the audio line-out jack. The audio line-out jack is also used to connect the audio function of an audio/video device such as a television or VCR. When connecting a device to the audio line-out jack: ■ Use only a 3.5-mm stereo plug. ■ For best sound quality, use 24-ohm to 32-ohm headphones. ■ The internal speakers are disabled. Using the Microphone Jack When connecting a microphone to the microphone jack, use a single-sound channel (monaural) microphone with a 3.5-mm plug. A monaural electret condenser microphone is recommended. ■ If you connect a stereo microphone, left-channel sound will record on both channels. ■ If you connect a dynamic microphone, the recommended sensitivity may not be achieved. 5-2 Hardware Guide