Craftsman 020395 Operation Manual - Page 5
Warning, Whenadjustingor Making, To Your Pressure, Washer, Whentestingforenginespark, Only.
View all Craftsman 020395 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
_i, WARNING Use of pressure washer can create ,_ pKuicdkdblaecsk afnrodmslipspprearyy gsuunrfaccaens.cause you to fall. • Operate pressure washer from a stable surface. • The cleaning area should have adequateslopes and drainage to reduce the possibility of a fall due to slippery surfaces. • Be extremely careful if you must use the pressure washer from a ladder, scaffolding, or any other similar location. • Firmly grasp spray gun with both hands when using high pressure spray to avoid injury when spray gun kicks back. _i, WARNING Unintentional sparking can result in fire or _¢ electric shock. WHENADJUSTINGOR MAKINGREPAIRSTO YOUR PRESSURE WASHER • Disconnect the spark plug wire from the spark plug and place the wire where it cannot contact spark plug. WHENTESTINGFOR ENGINESPARK • Use approved spark plug tester. • DO NOT check for spark with spark plug removed. _i, WARNING Starter and other rotating parts can entangle hands, hair, clothing, or accessories. • NEVERoperate pressure washer without protective housing or covers. • DO NOTwear loose clothing, jewelry or anything that may be caught in the starter or other rotating parts. • Tie up long hair and remove jewelry. A WARNING Risk of eye injury. Spray can splash back or propel objects. • Always wear indirect vented (chemical splash) safety goggles marked to comply with ANSI Z87.1 when using or in vicinity of this equipment. • NEVERsubstitute safety glasses or dry-condition goggles for indirect vented safety goggles. NOTICE High pressure spray may damage fragile items including glass. • DONOTpointspraygun at glasswhenusingred(0°) spraytip. • NEVERaimspraygun at plants. NOTICE Improper treatment of pressure washer can damage it and shorten its life. • If you have questions about intended use, ask dealer or contact Sears. • NEVERoperate units with broken or missing parts, or without protective housing or covers. • DO NOT by-pass any safety device on this machine. • DO NOT tamper with governed speed. • DO NOT operate pressure washer above rated pressure. • DO NOT modify pressure washer in any way. • Before starting pressure washer in cold weather, check all parts of the equipment to be sure ice has not formed there. • NEVERmove machine by pulling on hoses. Use handle provided on unit. • Check fuel system for leaks or signs of deterioration, such as chafed or spongy hose, loose or missing clamps, or damaged tank or cap. Correct all defects before operating pressure washer. • This equipment is designedto be used with Searsauthorized parts ONLY.If equipment is used with parts that DO NOTcomply with minimum specifications, user assumes all risks and liabilities.