Craftsman 28813 Operation Manual - Page 22

Warning: To Avoid

Get Craftsman 28813 - 46 in. Lawn Tractor PDF manuals and user guides
UPC - 071288130000
View all Craftsman 28813 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

WViCAERNOIRNGAD: JTUOSTAMVENOTISD: SERIOUS iNJURY, BEFORE PERFORMING ANY SER- 1. Depress clutch/brake pedal fully and set parking brake. 2. Place gearshift lever in neutral (N) position. 3. Place attachment clutch in "DISENGAGED" position. 4. Turn ignition key to "STOP" and remove key. 5. Make sure the blades and all moving parts have completely stopped. 6. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. TRACTOR TO REMOVE MOWER 1. Place attachment clutch in "DISEN- GAGED" position. 2. Lower attachment lift lever to its lowest position. 3. Roll belt off engine pulley (M). 4. Remove retainer spring (K), slide collar (L) off and push housing guide (P) out of bracket. 5. Remove clutch cable spring (Q) from idler arm (R). 6. Disconnect front link (E) from mower - remove retainer spring and washer. 7. Go to either side of mower and discon- nect mower suspension arm (A) from chassis pin (B) and rear lift link (C) from rear mower bracket (D) - remove retainer springs and washers. 8. Go to other side of mower and discon- nect the suspension arm and rear lift link. CAUTION: After rear lift links are dis- connected, the attachment lift lever will be spring loaded. Have a tight grip on lift lever when changing position of the lever. 9. Slide mower out from under right side of tractor. IMPORTANT: If an attachment other than the mower is to be mounted on the tractor, remove the front link (E) and rear lift liks (C) from tractor and hook the clutch spring (Q) into the cable guide on front edge of lower dash. TO iNSTALL MOWER Be sure tractor is on level surface and engage parking brake, 1. Lower attachment lift lever to it's lowest position. A CAUTION: Lift lever is spring loaded. Have a tight grip on lift lever, lower it slowly and engage in lowest position. 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
WARNING: TO AVOID
SERIOUS
iNJURY,
BEFORE
PERFORMING
ANY
SER-
ViCE
OR
ADJUSTMENTS:
1.
Depress
clutch/brake
pedal
fully
and
set
parking
brake.
2.
Place
gearshift
lever
in neutral
(N)
position.
3.
Place
attachment
clutch
in
"DISENGAGED"
position.
4.
Turn
ignition
key to
"STOP"
and
remove
key.
5.
Make
sure
the
blades
and
all moving
parts
have
completely
stopped.
6.
Disconnect
spark
plug
wire
from
spark
plug
and
place
wire
where
it
cannot
come
in
contact
with
plug.
TRACTOR
TO REMOVE
MOWER
1.
Place attachment
clutch in "DISEN-
GAGED"
position.
2.
Lower attachment
lift lever to its lowest
position.
3.
Roll belt off engine
pulley
(M).
4.
Remove
retainer
spring
(K), slide collar
(L) off and push housing
guide
(P) out
of bracket.
5.
Remove
clutch
cable spring
(Q) from
idler arm (R).
6.
Disconnect
front link (E) from mower
- remove
retainer
spring
and washer.
7.
Go to either
side of mower
and discon-
nect mower
suspension
arm (A) from
chassis
pin (B) and rear lift link (C)
from rear mower
bracket
(D) - remove
retainer
springs
and washers.
8.
Go to other side of mower
and discon-
nect the suspension
arm and rear lift
link.
CAUTION:
After
rear lift links are dis-
connected,
the attachment
lift lever will be
spring
loaded.
Have a tight grip on lift lever
when changing
position
of the lever.
9.
Slide mower
out from under
right side
of tractor.
IMPORTANT:
If an attachment
other than
the mower
is to be mounted
on the tractor,
remove
the front
link (E) and rear lift liks
(C) from tractor
and hook the clutch spring
(Q) into the cable guide
on front edge of
lower dash.
TO
iNSTALL
MOWER
Be sure
tractor
is
on
level
surface
and
engage
parking
brake,
1.
Lower
attachment
lift lever
to
it's
lowest
position.
A
CAUTION:
Lift lever
is
spring
loaded.
Have
a tight
grip
on
lift lever,
lower
it
slowly
and
engage
in lowest
position.
22