Craftsman 536.270320 Owners Manual - Page 13
How To Set The Parking, Brake, How To Transport
View all Craftsman 536.270320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
OPERATION HOW TO SET THE PARKING BRAKE 1 Completely push the clutch/brake pedal forward 2 Lift the parking brake lever (Figure !0) 3. Remove yourfoot from the clutch/brake pedal and then release the parking brake lever Make sure the parking brake will hold the unit 4 To release the parking brake, completely push the clutch!brake pedal forward The parking brake will automatically release WARNING: Before you leave the operator's position, ,_ mpaorvkeingthebsrahkieft.leMveorvteo tthhee neautttaraclhm(Ne)nptoscittiuotnc.h Steot tthhee DISENGAGE position. Stop the engine and remove the ignition key. HOW TO CHANGE THE CUTTING HEIGHT To change the cutting height, raise or lower the lift lever as follows. 1 Move the lift lever forward to lower the mower housing and back to raise the mower housing 2 When you ride on a sidewalk or road, move the lift lever to the highest position and move the attachment clutch to the DISENGAGE position. Parking Brake Lever Lift Lever Figure 10 HOW TO STOP THE UNIT 1. Completely push the clutch/brake pedal forward to stop the unit. Keep yourfoot on the pedal 2 Move the attachment clutch to the DISENGAGE position. 3 Move the shift lever to the NEUTRAL position 4. Set the parking brake. ,_ WunAitR. NING: Make sure the parking brake will hold the 5. Move the throttle control to the SLOW position 6. To stop the engine, turntheignit]onkeytotheOFFposition Re- move the key. HOW TO TRANSPORT THE UNIT To transport the unit, follow the steps below 1. Move the attachment clutch to the DISENGAGE position 2 Raise the lift lever to the highest position 3. Move the throttle control to a position between SLOW and FAST. 4. To go faster, move the shtft lever to a faster speed F-99636 !3 Downloaded from www.Manualslib.com manuals search engine