Craftsman 536.270320 Owners Manual - Page 14
Howto Operatewiththe Mowerhousing, How To, Unit On Hills
View all Craftsman 536.270320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
OPERATION HOWTO OPERATEWITH THE MOWERHOUSING WARNING: The deflector is a safety device. Do not remove the deflector. The deflector forces the dis- ,_ cdheaflregcetodr minattehreiadlotowwnaprdostihtieong.roIfutnhde. dAelfwleacytsorkiesedpatmhe- aged, replace the deflector with an original equipment part from an authorized service center. t Start the engine. 2. Move the lift lever to a height of cut position In high or thick grass, cut the grass in the highest position first and then lower the mower housing to a lower position. 3 Move the throttle control to the SLOW position. 4. Move the attachment clutch to the ENGAGE position. 5. Push the clutch!brake pedal completely forward. 6 Move the shift lever to one of the speed settings NOTE: When you mow in heavy grass or mow with a bagger, put the shift lever in the slowest speed. 7, Slowly release the clutch/brake pedal 8. Move the throttle control to the FAST position. If you need to go faster or slower, stop the unit and move the shift lever to another speed setting. 9, Make sure the level of cut is still correct. After you mow a short distance, look at the area that was cut. If the mower housing does not cut level, see the instructions on "How To Level The Mower Housing" in the Service And Adjustment section. ,_ WseAleRcNt IaNGsa: fe Fspoer ebde. tter control of the unit, always HOW TO OPERATE THE UNIT ON HILLS steep to back straight up. Never ride the unit across ,_ Wa AslRoNpeIN. GS:eeDothneot"rSidloepeup Goruiddoew" ninslothpeesbtahcakt aorfetthoios book for information on how to check slopes. 1. Before you dde up or down a hill, move the shift lever to the slowest speed. 2 Do not stop or change speed settings on a hil!. If you must stop, quickly push the clutch/b rake pedal forward and set the parking brake 3. To start again, make sure the shift lever is in the slowest speed. Move the throttle control to the SLOW position Slowly release the pedal. 4. If you must stop or start on a hill, always have enough space for the unit to roll when you release the brake and engage the clutch. 5. Be very careful when you change directions on a hill When on a slope or in a turn on a hill, move the throttle control to the SLOW position to help prevent an accident. F-99636 14 Downloaded from www.Manualslib.com manuals search engine