Creative AWE64 User Manual - Page 12
Click the Performance Settings button. - dos
View all Creative AWE64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
SPDIF Out jack (on separate metal bracket) Connects an external digital device that uses a SPDIF connector, such as a Digital Audio Tape (DAT) machine, for playback or recording. SPDIF connector (on audio card) Connects the SPDIF Out jack to transfer digital audio signals from your audio card to a device that also uses a SPDIF connector, such as the DAT machine. Figure 1-2: Connection of SPDIF Out jack to SPDIF connector. The end of the cable attached to the SPDIF Out jack must be connected to the SPDIF connector on your audio card. The digital audio signals from the SPDIF Out jack contain audio output from the EMU8000 wavetable chip mixed with digital voice playback if the playback is in 16-bit stereo mode, 44.1 kHz CD quality. If you want to listen to WaveSynth/WG through the SPDIF Out jack, you must enable the "Enable WaveSynth to play at CD quality" feature. To do so: 1. Start CreativeWaveSynth-Waveguide. The WaveSynth/WG properties sheet appears, displaying the Profile tab. 2. Click the Performance Settings button. 3. In the Settings dialog box, select the Enable WaveSynth To Play At CD Quality check box and click the OK button. 4. In the WaveSynth/WG properties sheet, click the Quit button to close it. Setting Up Your Audio Card 1-3