D-Link DAP-1665 User Manual

D-Link DAP-1665 Manual

Get D-Link DAP-1665 PDF manuals and user guides View all D-Link DAP-1665 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DAP-1665 manual content summary:

  • D-Link DAP-1665 | User Manual - Page 1
    Version 1.0 | 1/3/2014 User Manual Wireless AC1200 Dual Band Access Point DAP-1665
  • D-Link DAP-1665 | User Manual - Page 2
    herein are trademarks or registered trademarks of their respective companies. Copyright © 2014 by D-Link Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior express written permission from D-Link Systems, Inc. D-Link DAP-1665 User Manual i
  • D-Link DAP-1665 | User Manual - Page 3
    46 LAN Setup 49 Advanced 53 Access Point Mode 53 Access Settings 53 Advanced Wireless 54 Wi-Fi Protected Setup 55 User Limit 56 Wireless Client Mode 57 Advanced Wireless 57 Bridge Mode 58 Advanced Wireless 58 Bridge with AP Mode 59 Advanced Wireless 59 D-Link DAP-1665 User Manual ii
  • D-Link DAP-1665 | User Manual - Page 4
    Users 97 Windows® 7/Vista® Users 97 Windows® XP Users 97 Statically Assign an IP Address 98 Windows® 8 Users 98 Windows® 7/ Vista® Users 99 Technical Specifications 100 Contacting Technical Support 101 GPL Code Statement 102 Warranty 117 Registration 124 D-Link DAP-1665 User Manual iii
  • D-Link DAP-1665 | User Manual - Page 5
    Section 1 - Product Overview Product Overview Package Contents DAP-1665 Wireless AC1200 Dual Band Access Point Ethernet Cable Two Detachable Antennas1 Power Adapter Wi-Fi Configuration Card Quick Install Guide If any of the above items are missing, please contact your reseller. Note: Using a
  • D-Link DAP-1665 | User Manual - Page 6
    Browser Requirements: • Internet Explorer® 8.0 or higher • Firefox®20.0 or higher • Chrome™ 20.0 or higher • Safari® 4.0 or higher Windows® Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version. D-Link DAP-1665 User Manual 5
  • D-Link DAP-1665 | User Manual - Page 7
    point) can be configured to operate in five different modes: Access Point, Wireless Client, Repeater, Bridge, and Bridge with AP Mode. The DAP-1665 features Wi-Fi Protected Access (WPA-PSK/WPA2-PSK), providing an enhanced level of security for wireless data communications. The AP also supports
  • D-Link DAP-1665 | User Manual - Page 8
    of up to 1200 Mbps1 . This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio. • Flexible Operation Modes - The DAP-1665 can operate as an Access Point, Repeater, Wireless Client, Bridge and Bridge with AP, meaning that
  • D-Link DAP-1665 | User Manual - Page 9
    Use an unfolded paper clip to press and hold the reset button for 10 seconds. This will reset the DAP-1665 to its original factory default settings. 2 LAN Port Connect an Ethernet-based device such Receptor Plug the supplied power adapter into the power receptor. D-Link DAP-1665 User Manual 8
  • D-Link DAP-1665 | User Manual - Page 10
    . 3 5GHz Wireless LED A solid green light indicates that the 5 GHz wireless band is active. The light will be off during device reboot or if the wireless radio is disabled. 4 LAN LED A solid green light indicates a connection to an Ethernet-enabled device. D-Link DAP-1665 User Manual 9
  • D-Link DAP-1665 | User Manual - Page 11
    Hardware Overview WPS Button 1 2 1 WPS Button 2 Kensington Slot Press this button to use WPS (Wi-Fi Protected Setup) to establish a secure connection with other wireless devices. Connect a Kensington® lock device to protect your access point against theft. D-Link DAP-1665 User Manual 10
  • D-Link DAP-1665 | User Manual - Page 12
    the device to your networking requirements. Refer to the following sections to determine which mode is best for you. • Access Point Mode - page 12 • Wireless Client Mode - page 13 • Repeater Mode - page 14 • Bridge Mode - page 15 • Bridge with AP Mode - page 16 D-Link DAP-1665 User Manual 11
  • D-Link DAP-1665 | User Manual - Page 13
    select the Wi-Fi Network Name (SSID) broadcast by the access point to wirelessly access the network. If wireless security is enabled on the AP, you must enter a password in order to connect to the Wi-Fi Network. AP Mode Internet Router DAP-1665 Wireless Devices D-Link DAP-1665 User Manual 12
  • D-Link DAP-1665 | User Manual - Page 14
    console. Client Mode Internet Wireless Router DAP-1665 Video Game Console Note: If you would like to connect multiple Ethernet-enabled devices to your DAP-1665, connect the LAN port of the DAP-1665 to an Ethernet switch, then connect your devices to this switch. D-Link DAP-1665 User Manual 13
  • D-Link DAP-1665 | User Manual - Page 15
    network name and security method. Repeater Mode Internet Wireless Router DAP-1665 Wireless Devices Note: For best performance, place your DAP-1665 in between your router and your dead zone, making sure it's placed in a location where the signal is still strong. D-Link DAP-1665 User Manual 14
  • D-Link DAP-1665 | User Manual - Page 16
    . Note: Bridge mode is not specified in the Wi-Fi or IEEE standards. This mode will only work using two DAP-1665 units. Compatibility with other APs (even other D-Link APs) is not guaranteed. Bridge Mode Internet Router/ Switch DAP-1665 DAP-1665 Router/ Switch D-Link DAP-1665 User Manual 15
  • D-Link DAP-1665 | User Manual - Page 17
    Wi-Fi or IEEE standards. This mode will only work using two DAP-1665 units. Compatibility with other APs (even other D-Link APs) is not guaranteed. Bridge with AP Mode Internet Router/ Switch DAP-1665 DAP-1665 Router/ Switch Wireless Devices Wireless Devices D-Link DAP-1665 User Manual 16
  • D-Link DAP-1665 | User Manual - Page 18
    on range. Try to position access points, wireless routers, and computers so that wireless connection may also be affected. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is not in use. D-Link DAP-1665 User Manual
  • D-Link DAP-1665 | User Manual - Page 19
    1 Find an available power outlet near your wireless router. Plug the supplied power adapter into your DAP-1665 and connect it to the outlet or to a surge protector. Press the Power button on the back of the device. Verify that the Power LED is lit. RESET LAN 5V 1A D-Link DAP-1665 User Manual 18
  • D-Link DAP-1665 | User Manual - Page 20
    . Allow up to two minutes for the WPS process to complete. Note: For optimal performance using Repeater Mode, place your DAP-1665 in between your router and your dead zone, making sure it's placed in a location where the signal is still strong. RESET LAN 5V 1A D-Link DAP-1665 User Manual 19
  • D-Link DAP-1665 | User Manual - Page 21
    Section 2 - Installation Note: Final installation step for Wireless Client Mode -- You can connect one Ethernet-enabled device to the AP using an Ethernet cable. RESET LAN 5V 1A or or D-Link DAP-1665 User Manual 20
  • D-Link DAP-1665 | User Manual - Page 22
    Wireless Setup Wizard will allow you to select either Access Point, Wireless Client, or Repeater for your preferred Wireless Mode. (Refer to "Wireless Setup Wizard" on page 22.) You must use Manual Configuration to set up your DAP-1665 in Bridge Mode or Bridge with AP Mode. Go to Setup > Wireless
  • D-Link DAP-1665 | User Manual - Page 23
    your DAP-1665 in Access Point, Wireless Client, or Repeater mode. If you would like to configure the device in Bridge or Bridge with AP mode, skip to "Manual Configuration"on page 33. You will see the Wi-Fi Connection Setup Wizard screen. Click Next to continue. D-Link DAP-1665 User Manual 22
  • D-Link DAP-1665 | User Manual - Page 24
    3 - Configuration Access Point Mode The Wi-Fi Connection Setup Wizard will assist you in configuring your DAP-1665 as an access point, allowing you to connect wireless clients to your wired network. The DAP-1665 can act as the wireless transmitter for your router or become a separate access point to
  • D-Link DAP-1665 | User Manual - Page 25
    you the opportunity to save the address for the web-based configuration utility in your browser's bookmarks. Click OK to save or click Cancel to continue without saving a bookmark. In order for your network settings to take effect AP will reboot automatically. D-Link DAP-1665 User Manual 24
  • D-Link DAP-1665 | User Manual - Page 26
    the configuration method only if your wireless device supports Wi-Fi Protected Setup (WPS). Otherwise, select Manual and, skip to page 27 for instructions. Click Next to continue. Press the WPS button on your wireless router with 120 seconds to complete the WPS setup process. D-Link DAP-1665 User
  • D-Link DAP-1665 | User Manual - Page 27
    will see a message that says a connection has been successfully made. Click Finish to complete the setup process. Note: If the connection was not successful, you will see a message that says the connection failed. Click Retry to try again, or Cancel to discontinue. D-Link DAP-1665 User Manual 26
  • D-Link DAP-1665 | User Manual - Page 28
    Section 3 - Configuration Select Manual configuration to setup your network manually. Click Next to continue. The DAP-1665 will scan for available wireless networks in your area. You will see a list of available wireless networks. Locate the SSID of the wireless network that you wish to connect to
  • D-Link DAP-1665 | User Manual - Page 29
    you the opportunity to save the address for the web-based configuration utility in your browser's bookmarks. Click OK to save or click Cancel to continue without saving a bookmark. In order for your network settings to take effect AP will reboot automatically. D-Link DAP-1665 User Manual 28
  • D-Link DAP-1665 | User Manual - Page 30
    Section 3 - Configuration Repeater Mode The Wi-Fi Setup Wizard will assist you in configuring your DAP-1665 as a repeater to extend the range of your existing wireless network. Select Repeater from the drop-down menu. Select WPS as the configuration method only if your wireless device supports Wi-
  • D-Link DAP-1665 | User Manual - Page 31
    will see a message that says a connection has been successfully made. Click Finish to complete the setup process. Note: If the connection was not successful, you will see a message that says the connection failed. Click Retry to try again, or Cancel to discontinue. D-Link DAP-1665 User Manual 30
  • D-Link DAP-1665 | User Manual - Page 32
    Section 3 - Configuration Select Manual configuration to setup your network manually. Click Next to continue. The DAP-1665 will scan for available wireless networks in your area. You will see a list of available wireless networks. Find the SSID of the wireless network that you wish to connect to
  • D-Link DAP-1665 | User Manual - Page 33
    or not the network name is the same. Click Next to continue. A summary page will be displayed showing the Repeater Network Name and Wi-Fi Password for the extended network. Make a note of this information for future reference. Click Save to save the configuration. D-Link DAP-1665 User Manual 32
  • D-Link DAP-1665 | User Manual - Page 34
    for detailed instructions on how to manually configure the DAP-1665 after selecting the Wireless Mode that you prefer. • Access Point Mode - page 34 • Wireless Client Mode - page 37 • Bridge Mode - page 38 • Bridge with AP Mode - page 39 • Repeater Mode - page 43 D-Link DAP-1665 User Manual 33
  • D-Link DAP-1665 | User Manual - Page 35
    amount of interference. Channel Select the Channel Width: Width: Auto 20/40 MHz - Select if you are using both 802.11n and non-802.11n wireless devices. 20 MHz - Select if you are not using any 802.11n wireless clients. D-Link DAP-1665 User Manual 34
  • D-Link DAP-1665 | User Manual - Page 36
    by default. Wireless Specify a Network Name (SSID) to identify the 5GHz network. Network Name: This is the network name that wireless clients will search for when connecting to your wireless network. This name should be different to that of the 2.4GHz network configured above. D-Link DAP-1665 User
  • D-Link DAP-1665 | User Manual - Page 37
    have to be manually entered so wireless clients can connect. Security Mode: For information on how to set up wireless security, please refer to "Configuring Wireless Security" on page 46. Click Save Settings at the top of the page to save the current configuration. D-Link DAP-1665 User Manual 36
  • D-Link DAP-1665 | User Manual - Page 38
    Reset PIN to Default to reset the PIN number to the factory default settings. Click Generate New PIN to randomly generate a new PIN for WPS connection. Click Process WPS to begin the WPS Push-Button setup process. Click Save Settings to save the current configuration. D-Link DAP-1665 User Manual
  • D-Link DAP-1665 | User Manual - Page 39
    at the top of the page to save the current configuration. Note: The Bridge Mode is not completely specified in the Wi-Fi or IEEE standards. This mode will work with other DAP-1665 units. Communication with other APs (even other D-Link APs) is not guaranteed. D-Link DAP-1665 User Manual 38
  • D-Link DAP-1665 | User Manual - Page 40
    at the top of the page to save the current configuration. Note: The Bridge with AP Mode is not completely specified in the Wi-Fi or IEEE standards. This mode will work with other DAP-1665 units. Communication with other APs (even other D-Link APs) is not guaranteed. D-Link DAP-1665 User Manual 39
  • D-Link DAP-1665 | User Manual - Page 41
    the network name (SSID) of your 2.4GHz wireless network to be Visible or Invisible. If Invisible is selected, the SSID of the DAP-1665 will not be shown by Site Survey utilities. Therefore, the SSID will have to be manually entered so wireless clients can connect. D-Link DAP-1665 User Manual 40
  • D-Link DAP-1665 | User Manual - Page 42
    This is the SSID that wireless clients will search for when connecting to your wireless network. This name should be different from that of the 2.4GHz network configured above. 802.11 Mode: When the Bridge Band here is only possible when Bridge Band is set to 2.4GHz. D-Link DAP-1665 User Manual 41
  • D-Link DAP-1665 | User Manual - Page 43
    will have to be manually entered so wireless clients can connect. Security Mode: For information on how to set up wireless security, refer to "Configuring Wireless Security" on page 46. Click Save Settings at the top of the page to save the current configuration. D-Link DAP-1665 User Manual 42
  • D-Link DAP-1665 | User Manual - Page 44
    naming the DAP-1665's extended network: Network Name: Same as Repeater Name - The extended network will have the same name (SSID) as the repeater network. Create a New Wi-Fi Network Name - Enter a new Network Name (SSID) for the extended network in the field below. D-Link DAP-1665 User Manual 43
  • D-Link DAP-1665 | User Manual - Page 45
    - Select if you are using 802.11ac wireless clients. 802.11ac and 802.11n - Select if you are using a mix of 802.11ac and 802.11n wireless clients. Mixed 802.11ac, 802.11n and 802.11a - Select if you are using a mix of 802.11ac, 802.11n, and 802.11a wireless clients. D-Link DAP-1665 User Manual 44
  • D-Link DAP-1665 | User Manual - Page 46
    to "Configuring Wireless Security" on page 46. Wi-Fi Protected Check the box to Enable the use of Wi-Fi Protected Setup (WPS) Setup: for Repeater Mode. Current PIN: Displays the Current PIN which can be used to connect to the router using the WPS-PIN method. Click Reset PIN to Default to reset the
  • D-Link DAP-1665 | User Manual - Page 47
    (password) for your wireless network. The key should adhere to the requirements of WEP Encryption method specified above. Authentication: Select an Authentication method from the drop-down menu Click Save Settings at the top of the page to save the current configuration. D-Link DAP-1665 User Manual
  • D-Link DAP-1665 | User Manual - Page 48
    centralized authentication for wireless access. If you are missing any of the required information for this setup, please contact your network administrator. Security Mode: Select WPA-Enterprise from the drop-down menu. WPA Mode: There are two versions of WPA supported by the DAP-1665, WPA and
  • D-Link DAP-1665 | User Manual - Page 49
    for an optional backup RADIUS server configuration. Second RADIUS Enter the IP Address for your network's backup RADIUS Server IP authentication server. Address: Second RADIUS Enter the port for Save Settings at the top of the page to save the current configuration. D-Link DAP-1665 User Manual 48
  • D-Link DAP-1665 | User Manual - Page 50
    Server address to be used by the access Server: point (for Static IP only). Secondary DNS Enter the Secondary DNS Server address to be used by the Server: access point (for Static IP only). Click Save Settings at the top of the page to save the current configuration. D-Link DAP-1665 User Manual 49
  • D-Link DAP-1665 | User Manual - Page 51
    length of time the DHCP address is leased for. Dynamic DHCP This table will display details for the clients which are currently Client List: receiving a DHCP address from the DHCP server. Click Save Settings at the top of the page to save the current configuration. D-Link DAP-1665 User Manual 50
  • D-Link DAP-1665 | User Manual - Page 52
    IPv6, the DAP-1665 can be configured to operate using the IPv6 protocol. My IPv6 When Link-Local Only is selected, this will set the access point's Connection is: local IPv6 address. LAN IPv6 Link- The router's local IPv6 address will be displayed here. This Local Address: address should be used
  • D-Link DAP-1665 | User Manual - Page 53
    the option to Use the following IPv6 DNS Server: Servers, enter the Primary IPv6 DNS server address to be used. Secondary DNS Enter the Secondary IPv6 DNS server address to be used. Server: Click Save Settings at the top of the page to save the current configuration. D-Link DAP-1665 User Manual 52
  • D-Link DAP-1665 | User Manual - Page 54
    client is currently connected to the access point, you can select it from the Client List drop-down menu, and click
  • D-Link DAP-1665 | User Manual - Page 55
    your area. If the channel width is operating at 40 MHz and there is another wireless network's channel overlapping and causing interference, the router will automatically change to 20 MHz. Click Save Settings at the top of the page to save the current configuration. D-Link DAP-1665 User Manual 54
  • D-Link DAP-1665 | User Manual - Page 56
    Click Add Wireless Device With WPS to activate the WPS-PBC Device: (Push-button) method. You will then have 120 seconds to press the WPS button on the new device that you wish to connect. Click Save Settings at the top of the page to save the current configuration. D-Link DAP-1665 User Manual 55
  • D-Link DAP-1665 | User Manual - Page 57
    that can be connected to the access point at any one time. Enable User Check the box to Enable the user limit function. Limit: User Limit: Enter a number of wireless clients (between 1-32). Click Save Settings at the top of the page to save the current configuration. D-Link DAP-1665 User Manual 56
  • D-Link DAP-1665 | User Manual - Page 58
    your area. If the channel width is operating at 40 MHz and there is another wireless network's channel overlapping and causing interference, the router will automatically change to 20 MHz. Click Save Settings at the top of the page to save the current configuration. D-Link DAP-1665 User Manual 57
  • D-Link DAP-1665 | User Manual - Page 59
    your area. If the channel width is operating at 40 MHz and there is another wireless network's channel overlapping and causing interference, the router will automatically change to 20 MHz. Click Save Settings at the top of the page to save the current configuration. D-Link DAP-1665 User Manual 58
  • D-Link DAP-1665 | User Manual - Page 60
    your area. If the channel width is operating at 40 MHz and there is another wireless network's channel overlapping and causing interference, the router will automatically change to 20 MHz. Click Save Settings at the top of the page to save the current configuration. D-Link DAP-1665 User Manual 59
  • D-Link DAP-1665 | User Manual - Page 61
    client is currently connected to the access point, you can select it from the Client List drop-down menu, and click
  • D-Link DAP-1665 | User Manual - Page 62
    your area. If the channel width is operating at 40 MHz and there is another wireless network's channel overlapping and causing interference, the router will automatically change to 20 MHz. Click Save Settings at the top of the page to save the current configuration. D-Link DAP-1665 User Manual 61
  • D-Link DAP-1665 | User Manual - Page 63
    new PIN. Click Add Wireless Device With WPS to activate the WPS-PBC (Push-button) method. You will then have 120 seconds to press the WPS button on the new device that you wish to connect. Click Save Settings at the top of the page to save the current configuration. D-Link DAP-1665 User Manual 62
  • D-Link DAP-1665 | User Manual - Page 64
    that can be connected to the access point at any one time. Enable User Check the box to Enable the user limit function. Limit: User Limit: Enter a number of wireless clients (between 1-32). Click Save Settings at the top of the page to save the current configuration. D-Link DAP-1665 User Manual 63
  • D-Link DAP-1665 | User Manual - Page 65
    . Graphical Graphical authentication uses a challenge-response test to prevent Authentication: unauthorized users from gaining access to the configuration utility through automated means. Click Save Settings at the top of the page to save the current configuration. D-Link DAP-1665 User Manual 64
  • D-Link DAP-1665 | User Manual - Page 66
    , click Drive: Upload Settings to apply the configuration in the file to the access point. Note: This will overwrite any current configuration. Restore to Click Restore Device to reset the DAP-1665's settings to the Factory Default factory defaults. Settings: Warning: This will erase all current
  • D-Link DAP-1665 | User Manual - Page 67
    connection to the access point to update the firmware. Language Pack After you have downloaded the new language pack, click Upgrade: Browse to locate a language pack file on your computer. Once located, click Upload to commence the language pack upgrade process. D-Link DAP-1665 User Manual 66
  • D-Link DAP-1665 | User Manual - Page 68
  • D-Link DAP-1665 | User Manual - Page 69
    IP Enter the Host Name or IP Address and click Ping if you wish Address: to conduct a ping test. Host Name or Enter the Host Name or IPv6 Address and click Ping if you wish IPv6 Address: to conduct an IPv6 ping test. Ping Result: Displays results of the ping test above. D-Link DAP-1665 User Manual
  • D-Link DAP-1665 | User Manual - Page 70
    new schedule rules for various access point functions. Schedules created here will be available for selection from schedule selection drop-down menus throughout the configuration utility. Name: Enter a name click on the Delete icon to delete the rule from the list. D-Link DAP-1665 User Manual 69
  • D-Link DAP-1665 | User Manual - Page 71
    Time (as current date and time) and Firmware Version. LAN: Displays the MAC Address and the private (local) IP settings for the access point. Wireless LAN: Displays the wireless MAC Address and wireless settings such as SSID and channel for the 2.4 GHz wireless band. D-Link DAP-1665 User Manual 70
  • D-Link DAP-1665 | User Manual - Page 72
    Section 3 - Configuration Logs TheDAP-1665 keeps a running log of events and activities occurring on the access point. If the device is rebooted, the logs will automatically be cleared. Log log to a file on your local computer. Refresh: This button refreshes the log. D-Link DAP-1665 User Manual 71
  • D-Link DAP-1665 | User Manual - Page 73
    that passes through it. You can view the number of packets that pass through the LAN and wireless portions of the network. The traffic counter will reset if the access point is rebooted. Use the buttons at the top of the page to Refresh or Clear the statistics. D-Link DAP-1665 User Manual 72
  • D-Link DAP-1665 | User Manual - Page 74
    allows you to view the wireless clients that are connected to your wireless access point. Connected Time: Displays the amount of time the wireless client has been connected to the access point. MAC Address: The Ethernet ID (MAC address) of the wireless client. D-Link DAP-1665 User Manual 73
  • D-Link DAP-1665 | User Manual - Page 75
    Section 3 - Configuration IPv6 This page displays IPv6 Internet and network connection details. D-Link DAP-1665 User Manual 74
  • D-Link DAP-1665 | User Manual - Page 76
    Section 3 - Configuration Help Menu D-Link DAP-1665 User Manual 75
  • D-Link DAP-1665 | User Manual - Page 77
    push-button located somewhere on the exterior casing, while others may have a software button located within the device's configuration software. Please refer to your wireless device's documentation for further information on how to connect to the DAP-1665 using WPS. D-Link DAP-1665 User Manual 76
  • D-Link DAP-1665 | User Manual - Page 78
    users and encrypt data. • WPA/WPA2 - Enterprise is designed for medium-to-large scale networking environments and uses a centralized RADIUS server for authentication. Users must be registered and authorized by the RADIUS server in order to access the wireless network. D-Link DAP-1665 User Manual
  • D-Link DAP-1665 | User Manual - Page 79
    Setup) is a simple and secure way to connect your wireless devices with the DAP-1665 when using Repeater or Wireless Client mode. Most wireless devices such as wireless routers, media players, printers, and cameras will have a WPS button (or a software utility with WPS). Refer to the user manual
  • D-Link DAP-1665 | User Manual - Page 80
    the wireless network icon in the taskbar, next to the time display. Clicking on this icon will display a list of wireless networks which are within connecting proximity of your computer. Select the desired network by clicking on the network name. Wireless Icon D-Link DAP-1665 User Manual 79
  • D-Link DAP-1665 | User Manual - Page 81
    the router, you can also press the WPS button on your router at this point to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected. D-Link DAP-1665 User Manual 80
  • D-Link DAP-1665 | User Manual - Page 82
    If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. Wireless Icon D-Link DAP-1665 User Manual 81
  • D-Link DAP-1665 | User Manual - Page 83
    get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DAP-1665 User Manual 82
  • D-Link DAP-1665 | User Manual - Page 84
    connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DAP-1665 User Manual 83
  • D-Link DAP-1665 | User Manual - Page 85
    . Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/ IP settings of your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DAP-1665 User Manual 84
  • D-Link DAP-1665 | User Manual - Page 86
    used. 1. Open the Windows Vista Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DAP-1665 User Manual 85
  • D-Link DAP-1665 | User Manual - Page 87
    -Fi password) that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DAP-1665 User Manual
  • D-Link DAP-1665 | User Manual - Page 88
    or choose to click the Generate New PIN button or Reset PIN to Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured router. D-Link DAP-1665 User Manual 87
  • D-Link DAP-1665 | User Manual - Page 89
    area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check the TCP/ IP settings of your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DAP-1665 User Manual 88
  • D-Link DAP-1665 | User Manual - Page 90
    the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DAP-1665 User Manual 89
  • D-Link DAP-1665 | User Manual - Page 91
    . Enter the WPAPSK passphrase and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DAP-1665 User Manual 90
  • D-Link DAP-1665 | User Manual - Page 92
    can occur during the installation and operation of the DAP-1665. Read the following descriptions if you are having problems. 1. Why can't I access the web-based configuration utility? When entering the name or IP address of the D-Link access point (192.168.0.50 for example), you are not connecting
  • D-Link DAP-1665 | User Manual - Page 93
    for 10 seconds. Release the button and the access point will go through its reboot process. Wait about 30 seconds to access the access point. The default IP address is 192.168.0.50. When logging in, the username is Admin and leave the password field empty. Reset D-Link DAP-1665 User Manual 92
  • D-Link DAP-1665 | User Manual - Page 94
    95, 98, and ME users type in command (Windows® NT, 2000, and XP users type in cmd) and press Enter (or click OK). • Once the window opens, you'll need to do a special ping. Use the following syntax: ping [url] [-f ] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DAP-1665 User Manual 93
  • D-Link DAP-1665 | User Manual - Page 95
    : • Open your browser, enter the IP address of your access point (192.168.0.50) and click OK. • Enter your username (Admin) and password (blank by default). Click OK to enter the web configuration page for the device. • Click on Setup and then click Manual Configure. • To change the MTU enter the
  • D-Link DAP-1665 | User Manual - Page 96
    cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link. D-Link DAP-1665 User Manual 95
  • D-Link DAP-1665 | User Manual - Page 97
    are installing your Wireless AC1200 Dual Band Access Point. Centralize the extender wireless network. Secure your wireless network by utilizing the WPA or WEP security feature on the extender and uplink router. Refer to "Wireless Security" on page 76 for more information. D-Link DAP-1665 User Manual
  • D-Link DAP-1665 | User Manual - Page 98
    the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DAP-1665 User Manual 97
  • D-Link DAP-1665 | User Manual - Page 99
    Set Default Gateway the same as the LAN IP address of your router or gateway. • Set Primary DNS the same as the LAN IP address of your router or gateway. • The Secondary DNS is optional (you may enter a DNS server from your ISP). • Click OK to save your settings. D-Link DAP-1665 User Manual 98
  • D-Link DAP-1665 | User Manual - Page 100
    . • Set Default Gateway the same as the LAN IP address of your router or gateway. • Set Primary DNS the same as the LAN IP address of your router or gateway. • The Secondary DNS is optional (you may enter a DNS server from your ISP). • Click OK to save your settings. D-Link DAP-1665 User Manual 99
  • D-Link DAP-1665 | User Manual - Page 101
    affect wireless signal range. 2All Maximum transmission power values expressed are for dual-chain mode. Maximum transmission power and included antennas may vary depending on regional regulations. 3 Frequency Range may vary depending on regional regulations. D-Link DAP-1665 User Manual 100
  • D-Link DAP-1665 | User Manual - Page 102
    asked questions and answers to technical issues. For customers within the United States: Phone Support: (877) 453-5465 Internet Support: http://support.dlink.com For customers within Canada: Phone Support: (800) 361-5265 Internet Support: http://support.dlink.ca D-Link DAP-1665 User Manual 101
  • D-Link DAP-1665 | User Manual - Page 103
    of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at: http://tsd.dlink.com.tw/GPL.asp The GPL code and LGPL code verbatim copies of this license document, but changing it is not allowed. D-Link DAP-1665 User Manual 102
  • D-Link DAP-1665 | User Manual - Page 104
    software, we are referring to freedom, not price. Our General Public Licenses are designed to problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. D-Link DAP-1665 User Manual
  • D-Link DAP-1665 | User Manual - Page 105
    " refers to any copyrightable work licensed under this License. Each licensee is addressed as "you". "Licensees" and "recipients" may be individuals or organizations. list of user commands or options, such as a menu, a prominent item in the list meets this criterion. D-Link DAP-1665 User Manual 104
  • D-Link DAP-1665 | User Manual - Page 106
    between those subprograms and other parts of the work. The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source. The Corresponding Source for a work in source code form is that same work. D-Link DAP-1665 User Manual 105
  • D-Link DAP-1665 | User Manual - Page 107
    is not allowed; section 10 makes it unnecessary. 3. Protecting Users' Legal Rights From Anti-Circumvention Law. No covered work shall be of enforcing, against the work's users, your or third parties' legal rights to forbid circumvention of technological measures. D-Link DAP-1665 User Manual 106
  • D-Link DAP-1665 | User Manual - Page 108
    and its resulting copyright are not used to limit the access or legal rights of the compilation's users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate. D-Link DAP-1665 User Manual 107
  • D-Link DAP-1665 | User Manual - Page 109
    years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code , for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the . D-Link DAP-1665 User Manual 108
  • D-Link DAP-1665 | User Manual - Page 110
    support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access form), and must require no special password or key for unpacking, reading or copying. D-Link DAP-1665 User Manual 109
  • D-Link DAP-1665 | User Manual - Page 111
    e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f ) Requiring indemnification of licensors and authors of that material by anyone who conveys assumptions directly impose on those licensors and authors. D-Link DAP-1665 User Manual 110
  • D-Link DAP-1665 | User Manual - Page 112
    . If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10. D-Link DAP-1665 User Manual 111
  • D-Link DAP-1665 | User Manual - Page 113
    in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. D-Link DAP-1665 User Manual 112
  • D-Link DAP-1665 | User Manual - Page 114
    of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange of the covered work and works based on it. D-Link DAP-1665 User Manual 113
  • D-Link DAP-1665 | User Manual - Page 115
    GNU Affero General Public License. Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General through a network will apply to the combination as such. D-Link DAP-1665 User Manual 114
  • D-Link DAP-1665 | User Manual - Page 116
    to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. Limitation of Liability. IN NO Link DAP-1665 User Manual 115
  • D-Link DAP-1665 | User Manual - Page 117
    to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. D-Link DAP-1665 User Manual 116
  • D-Link DAP-1665 | User Manual - Page 118
    the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link DAP-1665 User Manual 117
  • D-Link DAP-1665 | User Manual - Page 119
    price paid that is attributable to the Software. Except as otherwise agreed by D-Link the product to the original purchase point based on its return policy. In must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt dlink.com/. D-Link DAP-1665 User Manual 118
  • D-Link DAP-1665 | User Manual - Page 120
    Link. Return shipping charges shall be prepaid by D-Link if you use an address from D-Link Technical Support at .dlink.ca manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship back any accessories. D-Link DAP-1665 User Manual
  • D-Link DAP-1665 | User Manual - Page 121
    Link. Return shipping charges shall be prepaid by D-Link if you use an address firmware or other products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link Link DAP-1665 User Manual 120
  • D-Link DAP-1665 | User Manual - Page 122
    . Copyright ©2013 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. D-Link DAP-1665 User Manual 121
  • D-Link DAP-1665 | User Manual - Page 123
    frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no your body.to match the intended destination. The firmware setting is not accessible by the end user. D-Link DAP-1665 User Manual 122
  • D-Link DAP-1665 | User Manual - Page 124
    radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage cm de distance entre la source de rayonnement et votre corps. D-Link DAP-1665 User Manual 123
  • D-Link DAP-1665 | User Manual - Page 125
    Appendix G - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 January 3, 2014 D-Link DAP-1665 User Manual 124
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
Wireless AC1200
Dual Band Access Point
DAP-1665
User Manual
Version 1.0 | 1/3/2014