D-Link DAP-1665 User Manual - Page 61
Repeater Mode, Access Settings
View all D-Link DAP-1665 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Section 3 - Configuration Repeater Mode Access Settings Mac (Media Access Controller) filtering allows you to control wireless access to your network according to clients'MAC addresses. Configure MAC Use the drop-down menu to select your preferred MAC filtering Filtering: method: Turn MAC Filtering OFF - No MAC filtering will be implemented. Turn MAC Filtering ON and ALLOW computers listed to access the network - MAC filtering will be turned on, and only MAC addresses listed in the table below will be allowed access. Turn MAC Filtering ON and DENY computers listed to access the network - MAC filtering will be turned on, and only MAC addresses listed in the table below will be denied access. Checkbox: Check the box to indicate this MAC Address should be included in the MAC filtering rules. MAC Address: Enter the MAC Address of the client that you wish to filter. If the client is currently connected to the access point, you can select it from the Client List drop-down menu, and click