D-Link DAP-1665 User Manual - Page 52
My IPv6, Connection is, LAN IPv6 Link, Local Address, LAN IPv6, Address, Subnet Prefix, Length - d link default ip
View all D-Link DAP-1665 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Section 3 - Configuration IPv6 If you are connecting the access point to a network which is using IPv6, the DAP-1665 can be configured to operate using the IPv6 protocol. My IPv6 When Link-Local Only is selected, this will set the access point's Connection is: local IPv6 address. LAN IPv6 Link- The router's local IPv6 address will be displayed here. This Local Address: address should be used to access the web-based configuration utility through the IPv6 protocol. Click Save Settings at the top of the page to save the current configuration. My IPv6 Selecting Static IPv6 from the drop-down menu will allow you Connection is: to assign a static IPv6 address to the access point. LAN IPv6 Enter the LAN IPv6 Address here. This address should be Address: supplied by your Internet Service Provider (ISP). Subnet Prefix Enter the Prefix Length for IPv6 IP addresses on your network. Length: Default Gateway: Enter the default IPv6 gateway address for your network. Primary DNS Enter the primary IPv6 DNS server address for your network. Server: Secondary DNS Enter the secondary IPv6 DNS server address for your network. Server: Click Save Settings at the top of the page to save the current configuration. D-Link DAP-1665 User Manual 51