D-Link DCS-2120 Product Manual - Page 34

Section 3 - Configuration Access name: This option allows the user to specify the file name for RTSP streaming. RTSP port: This option allows the user to set a port other than the default UDP port 554. SSID: (Service Set Identifier) is a name that identifies a wireless network. Access Points and wireless clients attempting to connect to a specific WLAN (Wireless Local Area Network) must use the same SSID. The default setting is dlink. Wireless Mode: Click on the drop-down menu; select from the following options: Infrastructure - connecting the WLAN using an Access Point such as the DWL-2100AP or a DI-624 wireless router. Ad-Hoc - wireless mode used when connecting directly to a computer equipped with a wireless adapter in a peer-to-peer environment. Channel: Under Infrastructure mode, the wireless channel is automatically selected by the camera. Under Ad-Hoc mode, the default wireless channel setting is channel 6. Select the channel that is the same as the other wireless devices on your network. TX Rate: Select the transmission rate on the network. Auto is the default setting. Security: Select the encryption type from the drop-down list. The default setting for the encryption is None, which means the security is disabled. Auth mode: If the encryption type selected is WEP from the Security drop-down list, choose one of the authorization modes: Open - communicates the key across the network. Shared - allows communication only with other devices with identical WEP settings. Key length: Select the key length, either 64 bits or 128 bits D-Link DCS-2120 User Manual 34