D-Link DCS-2120 Product Manual - Page 56
In this window, enter the settings for the FTP server you wish to upload the image to. Optionally, - dcs default password
UPC - 790069289781
View all D-Link DCS-2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Section 3 - Configuration In this window, enter the settings for the FTP server you wish to upload the image to. Optionally, you can enter settings for a secondary backup FTP server. Local FTP server port: The Default port is 21. To connect to an FTP server, it is recommended that you do not change the port number unless your camera is behind a router. If your camera is behind a router, you can assign any port number to this field, but you must enable port forwarding on the router. Please refer to your router manual for more information on port forwarding. 1st FTP server: If you are going to upload snapshots to an FTP server, you will need to fill in the Domain name or IP address of your internal/external FTP server such as dlink.com or 192.168.0.123. (The server name and IP address will vary depending on the user.) The following user settings must be correctly configured for remote access. 1st FTP user name: Specify the user name to access the external FTP server (ex. John Smith). 1st FTP password: Specify the password to access the external FTP server (ex. 12345). 1st FTP remote folder: Specify the destination folder in the external FTP server (ex. snapshot). D-Link DCS-2120 User Manual 56