D-Link DCS-2120 Product Manual - Page 7
Hardware Overview - dcs e
UPC - 790069289781
View all D-Link DCS-2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Section 1 - Product Overview Hardware Overview Antenna Connector One antenna is included with the DCS-2120. It is fastened onto the antenna connector on the side panel to provide a connection with a wireless network. DC Power Connector The DC Power input connector is labeled DC 5V with a single jack socket to supply power to the DCS-2120. Ethernet Cable Connector The DCS-2120 features an RJ-45 connector for connections to 10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling. The port supports the NWay protocol, allowing the DCS-2120 to automatically detect or negotiate the transmission speed of the network. Reset Button Reset will be initiated when the reset button is pressed once and Power LED begins to flash. Factory Reset will be initiated when the reset button is pressed continuously for 30 seconds. Release the reset button and the Power LED will begin to flash indicating that the DCS-2120's settings are restored back to the factory settings. D-Link DCS-2120 User Manual