D-Link DES-5220TF Product Manual - Page 147
Power LED is Off, All LEDs Are Off, Forget Password
UPC - 790069220081
View all D-Link DES-5220TF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Fast Ethernet Switching System User's Guide Power LED is Off All LEDs Are Off Forget Password for them to communicate. Check the speed and duplex setting on both the port and device you are connecting to. Check the three pronged power plug and verify that you are getting power from the wall socket. Return the DES-5200 if the unit is on and the power LED is not working properly. If the DES-5200 is not powering on while the power cord is plugged into the wall socket, the power supply is not working. Return the unit. Check the power plug and verify that the DES-5200 is receiving adequate power. Log in to the DES-5200 using Local Console Management, see Chapter 5, Console Management, for instructions. Power the DES-5200 off and then power it on again. Use the monitor to check the error messages. Return the DES5200 to D-Link for service if the problem persists. If you forget your password, contact D-Link Technical Support at (949) 788-0805 for assistance or check our web site at www.dlink.com. Troubleshooting 140