D-Link DES-5220TF Product Manual - Page 45
Console Management
UPC - 790069220081
View all D-Link DES-5220TF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Fast Ethernet Switching System User's Guide Console Management Console Management is always done through the RS-232 serial port and requires a direct connection between the DES-5200 and a PC. This type of management is very useful when the network is down and the DES-5200 cannot be reached by any other means. Use Console Management to log into the DES-5200 for the first time. You do not need to know the IP address to log in using Console Management. You can change all the settings and configure the DES-5200, set the IP address and perform other management functions. The management session will timeout after five minutes if you have not taken any action. Press Enter or Control + r to refresh the screen. You will have to log in again after a timeout. Follow these steps to begin a management session using Console Management: 1. Attach the male end of the RS-232 serial cable provided with the DES-5200 to the RS-232 port located at the front of the DES-5200. 2. Attach the other end to the serial port of a PC or workstation. 3. Run a terminal emulation program using the following settings: • Emulation: VT-100/ANSI compatible • BPS: 19200 • Parity: None • Stop bits: 1 • Flow Control: Xon/Xoff • Terminal Keys: Enabled 4. Press Enter to display the login panel. 5. Log in using the default User Name and Password. The User Name and Password are case sensitive. • User Name: D-Link • Default Password: D-Link 6. Press Enter to reach the Main menu. Managing the DES-5200 38