D-Link DES-5220TF Product Manual - Page 149
Signature/Checksum test of Run Time
UPC - 790069220081
View all D-Link DES-5220TF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Fast Ethernet Switching System User's Guide Table 15: Explanation of LED Error Status Explanation of LED Error Status Boot Program Flash Damaged Run Time Program Flash Damaged CPU Memory Failure Peripheral Controller Failure Com Port Test Failure NPB Failure PSP Memory Failure PSP Failure FEIU Failure PHY Failure ARL Failure ARL Memory Failure Exception Handler This error message indicates that the Boot Program section of Flash Memory is either corrupted or damaged. Signature/Checksum test of Boot Program has failed. This error message indicates the Run Time Program section of Flash Memory is either corrupted or damaged. Signature/Checksum test of Run Time Program has failed. This error message indicates the CPU Memory (total of 8MB DRAM) section of the System Memory has failed its read/write test. This error message indicates the failure of the onboard 82C59 Interrupt Controller. This error message indicates the SIO chip has failed its diagnostic test. This error message indicates general failure of NPB chip(s). This error message indicates the port buffer (PSP Memory) has failed its on read/write test. This error message indicates general failure of PSP chip(s). This error message indicates general failure of FEIU chip(s). This error message indicates general failure of PHY chip(s). This error message indicates general failure of ARL chip(s). This error message indicates the MAC address table (ARL Memory) has failed its own read/write test. This error message indicates CPU exception occurs due to divide by zero, invalid opcode and other general protection. The content of all CPU registers will be dumped onto the console screen. Troubleshooting 142