D-Link DES-5220TF Product Manual - Page 59
Software Update Menu, Software Update Configuration, Download Mode, TFTP Server IP Address, File
UPC - 790069220081
View all D-Link DES-5220TF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Fast Ethernet Switching System User's Guide Store and Forward requires more memory because the DES-5200 must store the packet before sending it out. Address Aging Address aging is the length of time the address will remain in the MAC address table. Follow these steps to change the address aging: 1. Highlight the address aging and enter a new value from 10 to 1000000. 2. Select Save and press Enter. Select Exit and press Enter to exit the menu. Software Update Menu The Software Update menu is used to update the software on the DES-5200. Software can be updated using either XMODEM or TFTP. XMODEM requires a direct physical connection between a PC and the DES-5200. TFTP requires a TFTP server and that you know the Internet Protocol (IP) address of the server and the complete path and filename. TFTP can be done over the network or from a remote location. Software Update Configuration XMODEM There are two options on the menu displayed in Figure 27. XMODEM is the default option. Download Mode Enables you to select the method for downloading firmware. TFTP Server IP Address Enter the address of the TFTP server the firmware is going to be downloaded from. File Name The name of the file to be downloaded. Managing the DES-5200 52