D-Link DFE-2616IX User Guide - Page 75

♦ SA Changes. This statistic counts the number of times the source address has changed. ♦ Isolates (only for 100Mbps connections). Counts the number of times a port auto isolates. ♦ SymbolError (only for 100Mbps connections). Counts the number of times a received packet contained symbol errors. Only one symbol error is counted per packet regardless of the number of symbol errors within the packet. ♦ Total Errors. This statistic is the sum of the FCS Error, Alignment Error, Too Long Frame, Short Event, Late Event, Very Long Event, and Data Rate Mismatch counters. ♦ Readable Octs. This statistic counts the total number of bytes (octets) included in valid (readable) frames. DFE-2600 Stackable Hub - Network Monitoring : Port Statistics Current Group ID: 1 Pkts Frames Too Long: 0 Very Long Events: 0 Short Events: 0 Late Events: 0 Runt Frames: 2632 Collision: 8514 FCS Errors: 395 Alignment Errors: 9 Current Port ID: 9 Pkts/Sec Pkts 0 Readable Frames: 484447 0 Multicast: 7393 0 Broadcast: 305460 0 Auto Partition: 0 0 DRM: 0 0 SA Changes 319965 0 Isolates: 0 0 SymbolError: 0 Pkts/Sec 0 0 0 0 0 0 0 0 Total Errors: Errs 404 Errs/Sec Octs Octs/Sec 0 Readable Octs: 105350920 0 Next Monitoring Group ID [1] Next Monitoring Port ID [9 ] PREV GROUP NEXT GROUP PREV PORT NEXT PORT CLEAR COUNTER EXIT You can use PREV GROUP, NEXT GROUP, PREV PORT, and NEXT PORT to switch hubs or ports. CLEAR COUNTER resets all counters back to zero. Master Hub Setup and Management 63