D-Link DGS-3427 Product Manual - Page 292
IMPB Port Settings, IMPB Global Settings window
UPC - 790069283161
View all D-Link DGS-3427 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 292 highlights
xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch The DHCP Snoop State field will enable and disable the DHCP Snooping option. To view this window, click Security > IP-MAC-Port Binding > IMPB Global Settings: Figure 6 - 9 IMPB Global Settings window The following parameters can be set: Parameter Description Trap / Log DHCP Snoop (IPv4) This field will enable and disable the sending of trap log messages for IP-MAC binding. When enabled, the Switch will send a trap log message to the SNMP agent and the Switch log when an ARP packet is received that doesn't match the IP-MAC binding configuration set on the Switch. Use the pull-down menu to enable or disable the DHCP snooping state (IPv4) for IP-MACport binding. DHCP Snoop (IPv6) Use the pull-down menu to enable or disable the DHCP snooping state (IPv6) for IP-MACport binding. ND Snoop Use the pull-down menu to enable or disable the ND snooping state for IP-MAC-port binding. Click Apply to implement the settings made. IMPB Port Settings This window is used to configure IMP settings on a port basis. Select a port or a range of ports with the From Port and To Port fields. Enable or disable the port with Strict or Loose State, enable or disable Allow Zero IP and Forward DHCP Packet fields, and configure the port's Max IMPB entry. To view this window, click Security > IP-MAC-Port Binding > IMPB Port Settings, as shown below. 283