D-Link DGS-3427 Product Manual - Page 312
WAC Global Settings, WAC Global State window
UPC - 790069283161
View all D-Link DGS-3427 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 312 highlights
xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch WAC Global Settings This window is used to enable and configure Web-based Access Control Global State on the Switch. To view this window, click Security > Web-based Access control (WAC) > WAC Global Settings, as shown below. Figure 6 - 33 WAC Global State window The following parameters can be configured: Parameter Description WAC Global State Use this drop-down menu to either enable or disable WAC on the Switch. WAC Settings Method Use the drop-down menu to configure the Method, choose between Local or RADIUS. Local - Specifies that authentication will be done via the local database. RADIUS - Specifies that authentication will be done via the RADIUS server. Redirection Path Enter a redirection path that the client will be redirected to after successful authentication. When the string is cleared, the client will not be redirected to another URL after successful authentication. Virtual IP Enter a virtual IPv4 address so that the TCP packets sent to the virtual IP will get a reply. If the virtual IP is enabled, the TCP packets sent to the virtual IP or physical IPIF's (IP Interface's) IP address will both get a reply. When the virtual IP is set to 0.0.0.0 the function will be disabled. To ensure that this function works correctly, the virtual IP address must not be configured to be an IP address that exists on the subnet. Virtual IPv6 Enter a virtual IPv6 address so that the TCP packets sent to the virtual IP for IPv6 will get a reply. If the virtual IP for IPv6 is enabled, the TCP packets sent to the virtual IP or physical IPIF's IPv6 address will both get a reply. When the virtual IPv6 is set to ::, the function is disabled. To ensure that this function works correctly, the virtual IPv6 address must not be 303