D-Link DNS-340L User Manual - Page 18
until it connects. When a drive is inserted properly, you will feel it set into - sharecenter 4 bay
View all D-Link DNS-340L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Section 2 - Getting Started Attach the hard drive brackets to the sides of your hard drives with the included screws. Ensure the brackets are aligned so that when the hard drive is inserted, the arrow on the bracket points to the front of the ShareCenter . Insert up to four 3.5" SATA hard drives into the drive bays. Note: Make sure to align the drive connector to the SATA connector at the back edge inside the drive bay of the ShareCenter. Gently push the drive in until it connects. When a drive is inserted properly, you will feel it "set" into the connector. Some hard drives that are thin or oddly shaped may need to be inserted carefully into position. If a drive is not properly set in place, the hard drive LED will not illuminate after powering on the device. D-Link ShareCenter DNS-340L User Manual 16