D-Link DNS-340L User Manual - Page 243

Section 4 - Configuration USB Devices UPS Settings Network UPS is a system management feature that uses a local UPS to protect your NAS from an abnormal shutdown due to a power failure. To enable Network UPS to your NAS (Network Slave Mode): 1. Click to enable the Network UPS. 2. Enter an IP address of the Network UPS Master. 3. Click Save Settings to receive the critical power status from the network UPS master. The UPS Status will display the current status of your UPS. Note: Make sure that the ShareCenter is in the same network as the network UPS master. If a UPS device is connected to the USB port on your NAS, you can select either Stand-Alone or Master mode. If you select Master mode, you will have to enter the IP address(es) of the network UPS slaves to notify them in the event of a power failure. For more details, refer to "UPS Connectivity" on page 433. D-Link ShareCenter DNS-340L User Manual 241